A mix of individuals associated together in such a manner to fill a valuable need is called structure. Those individuals that are interconnected in such a manner in order to comprise a structure are called auxiliary individuals.
1-Shaft
The shaft is a flexure individual from the structure. It is exposed to transverse loadings, for example, vertical burdens, and gravity loads. These heaps make shear and bowing inside the shaft. Bars are level auxiliary individuals that are utilized to convey a heap.
2-Segments
Segments: those individuals that are fundamentally exposed to hub pressure powers. A section might be exposed to flexural powers moreover. Sections as a rule are suspected of as being vertical individuals, however they may likewise be slanted.
3-Supporting
Support – an auxiliary part used to solidify a system
4-Swagger
A compressive individual from a structure is called swagger. A swagger is an auxiliary part that is being pushed from far edges. It is said that a swagger "opposes pressure."
5-Ties
those individuals that are exposed to pivotal strain powers as it were. The heap is applied to ties just at the finishes. Ties can't avoid flexural powers
6-Shaft Section
An auxiliary part exposed to pressure just as flexure is called shaft segment
7-Network
A system of bar meeting each other at right edges and exposed to vertical burdens is called matrix.
8-Links and Curves
Links are normally suspended at their finishes and are permitted to droop. The powers are then unadulterated pressure and are coordinated along the pivot of the link. Curves are like links aside from hath they are rearranged. They convey compressive burdens that are coordinated along the hub of the curve.
9-Plates and Sections
Plates are three dimensional level auxiliary segments generally made of metal that are frequently found in floors and tops of structures. Sections are like plates aside from that they are typically made of cement.
No comments:
Post a Comment